Our productsOur products

Chain tensionersChain tensioners

Univerzális láncfeszítő

Roll-ring láncfeszítő gyűrű

Using sector

CRESA group

C-RESA is a line of automatic chain or belt tighteners working in rotation that use the elastic deformation of four cylinders made of natural rubber and lodged inside the hollows which result when two elements with square section are turned 45° one to the other. The maximum angle of torsion that the lever can reach is ±30° from the rest position. The C-RESA base elements are manifold so that, apart from being used as chain or belt tighteners, they can also be used as: shock absorbers, decelerators, vibrating elements and supports for net-, carpet- and roller-cleaning scrapers. The C-RESA can be provided with many interface kits: polyethylene sliding blocks, polyethylene pinions and rollers made of zinc plated steel or plastic. The C-RESA can be supplied with an electric or inductive travel-end switch that allows to check whether the machine works properly at every moment. In case of excessive chain lengthening or chain breaking, this device activates an acoustic or light signal or, if necessary, stops the plant. The C-RESA are also available with a preloading system to facilitate the installation operations.
Using sector

ARCO group

ARCO is an automatic chain or belt tightener working in rotation. The elastic movement is produced by a spiral spring of zinc plated steel that, conveniently guided, is subject to bending and torsional stress. This particularity confers it a very high index of reaction and a good constant for the ratio between the rotation angle and the developed force. As ARCO is entirely made out of zinc plated steel, it can also be used in extreme situations like for high temperatures (up to about +300°C) and low temperatures (up to about -50°C). Due to its specially designed cubic base one can assemble it in at least five different ways. The catalogue, by means of schemas, suggests some simple and economical usages showing that special anchoring brackets or supports are not necessary. ARCO can be provided with many interface kits: polyethylene sliding blocks, pinions and rollers made of zinc plated steel or plastic. ARCO is available in two versions with different maximum permitted rotation angles: ±40° and ±90° from the rest position.
Using sector

TEN BLOC group

TEN BLOC is an automatic axial chain or belt tightener designed to satisfy the widest market-needs. TEN BLOC consists of a a steel column thrusted by a mechanical spring connected to a box-shaped body made of die-cast aluminum. The column slides inside a bronze ring lodged inside the body. It is possible to mount different types of interface kits onto the column: polyethylene sliding blocks, polyethylene wheels on fork, pinions on fork and zinc plated steel rollers on fork. TEN BLOC can be provided with a preloading system (TB), with a one-directional system (TBB) or with an anti-rotation system (TBA). The box-shaped body can, furthermore, be equipped with an electric travel-end switch that allows to check whether the machine works properly at every moment. In case of excessive chain lengthening or chain breaking the same device activates an acoustic or light signal or, if necessary, stops the plant. Also part of the TEN BLOC product range are the DECA pressure units which can also be used as shock absorbers and decelerators. With DECAs one can obtain different forces of thrust and different travels according to one’s actual needs. The entire TEN BLOC product range makes it possible, on request, to perform special executions such as elements with double slide guide (TBCU) or elements functioning in drag conditions (TBt). TEN BLOC furthermore distinguishes itself for its modularity as it aptly joins several base elements (columns, cylinders, plugs, springs, junctions and bodies) thus enabling one to produce user-defined products which will suit individual needs.
Using sector

ASSO group

ASSO is an automatic axial chain or belt tightener that works on two columns thrusted by two mechanical springs lodged inside two aluminum bodies which have a square section and are linked one to the other by two zinc plated steel junctions. ASSO can be provided with a large number of interface kits: polyethylene sliding blocks, pinions and rollers made of zinc plated steel or plastic. ASSO is also available in a simple version with only one column. In this solution ASSO gets to be one of the smallest tighteners available on the market. ASSO can be provided with a preloading system to facilitate the installation operations. Thanks to its modular characteristics ASSO lends itself to realize pressure groups, shock absorber platforms or elastic platforms. Thanks to its versatility, ASSO makes it possible to realize special elements with personalized stroke and force of thrust or elements with double slide guide. Within the ASSO production line there is also a range of economical both fixed and manually adjustable tighteners (AH).
Using sector

CIAO Group

CIAO is a line of automatic chain or belt tighteners working in rotation entirely made out of plastic material and apt to work in damp and corrosive environments. They are mainly used in food and in pharmaceutical industry. The maximum rotation angle which the lever can reach is +/-30o. The operation of these products is noiseless and reliable thanks to its special construction. These products can be used for several applications for example: chain tensioning, belt tensioning, pressure compensation, vibration damping etc.
Using sector

BLU Group

BLU tensioners are designed to work in damp environment or in contact with corrosive agents. They can be used as automatic chain and belt tensioners, shock reducers and decelerators. They are in key position in drives, they guarantee the proper performance of the belt and chain drives, they lower the vibration of the kinematic moves and by this we can achieve a better drive which increases the life span of the machine and the components.
Using sector

TEN JOY Group

Ten Joy is an automatic axial chain or belt tightener particularly designed for roller conveyors with motor drive though it can be used with any type of motor drive. They can be used in push dumping and in push reducing or as automatic belt and chain tensioners.
Using sector

  

Panasonic kezdőcsomagok a Power Belt Kft. kínálatában

Panasonic kezdőcsomagok a Power Belt Kft. kínálatában

A Power Belt Kft. számára kiemelten fontos, hogy a vásárlók igényeinek megfelelően alakítsa ki termékkínálatát. Cégünk megbízható, kiváló minőségű Panasonic termékeket kínál a lehető legkedvezőbb áron.
Raktárunkban a szervóhajtás összes kiegészítő eleme megtalálható, amelyek csomagban kedvezőbb áron kaphatóak. Tekintse meg kezdőcsomag kínálatunkat!

Read more

  

Tájékoztatás Read more